收藏本站
? Confirm the file type and ensure the buffer can load all the files. ?
Chapter 5 Detail Explanations on Common Problems
You can monitor the programmer operations through the Operation Information
Window and message window. This chapter helps define common problems
related to programmer actions and errors.
Dealing with Data Files
This section explains common problems involving the File Type dialog box.
Solve Invalid File Type or File Data Overflow Error
The data for programming is usually stored in the data file. Commonly used
formats are Intel Hex, Motorola and Tektronix. The files of these formats keep
data in text mode, which include data and address information. Because the offset
address is not always zero, you may incur errors when loading the file directly.
For example, the location of data in buffer (as viewed in the Edit Buffer window)
may be incorrect or you may receive an error message when loading the file, such
as ?Invalid file type, or all file data overflow?.
Select one of the following options to solve this problem.
?
? Find the offset address of the file. When loading the file, select the Show
Offset Address (Minimize) After Loading option to display the start address
?
of the file after the file is loaded. ?
Example: File Offset Address (min): 0x0000E0000 (Hex) ?
This means the offset address of the file is not 0. You must move the
data at the address to the address 0 of the buffer. To do that, load the
file again, and enter E000 as the File Address .
Refer to the Load File section on page 22 for more information on loading files.
Separate File Data for Programming
By using the File Mode selection in the File Type dialog box, you can select the
data of a file and write it to several chips of the same type. This allows you to load
the file several times according to your needs.
There are three methods for separating the file data.
1. Based on byte (8bit), divide the file into two parts by the odd and even address.
Superpro ? 5000 User’s Guide
81
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
D1U-12-CONC 12V D1U OUTPUT CONNECTOR CARD
D1U-48-CONC 48V D1U OUTPUT CONNECTOR CARD
D1U-52-CONC 52V D1U OUTPUT CONNECTOR CARD
D1U3CS-D-850-12-HC4C DC/DC FRNT END 850W 12V 3.3V AUX
相关代理商/技术参数
CX100A6 制造商:DANAHER SPECIALTY PRODUCTS 功能描述:TIMER, EAGLE SIGNAL, ELECTRONIC REPEAT CYCLE, LCD, 120V, CYCL-FLEX PANEL MT 制造商:Veeder-Root Company 功能描述:ELECTRONIC CYCLE TIMER 制造商:VEEDER ROOT 功能描述:ELECTRONIC CYCLE TIMER; Supply Voltage Range:120V AC; Time Min:0.01s; Time Max:199.9h; Reset Time:30ms; No. of Digits / Alpha:4-1/2; Supply Current:10A; Supply Voltage AC Max:120V; Time Range:0.01sec to 199hr 59min
CX100B6 制造商:Veeder-Root Company 功能描述:
CX100DB BLACK 100M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 100M
CX100DB BLACK 250M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 250M
CX-100H 制造商:Taiyo Electric Ind. 功能描述:
CX-100NUT 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-2C 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-3C 制造商:Taiyo Electric Ind. 功能描述: